Turbine Vibrators GT Serie
 (Download - 104 KB)
|
- Powerful vibration, combined with low speed range and large working moment.
- Chemically resistant, suitable for use in the food and pharmaceutical industries.
- No lubrication, only clean air is required.
- Extremly silent, between 60 and 70 dBA.
|
Description
1. Extruded aluminum alloy body
2. Aluminum turbine wheel, hard coated
3-4. High density mass for positive moment
5-7. Cavities for negative moment
8. Air inlet (BSP thread, will accept NPT) 9. Air exhaust (BSP thread, will accept NPT)
10. Base mounting holes
11. Special pre-lubricated shielded bearings
12. Hard coated aluminum end plate with left-handed thread
13. Hard coated aluminum end plate with right-handed thread
Dimensions and weights
|
Type |
A |
B |
C |
D |
E |
F |
G |
H |
kg |
|
GT-4 |
40.0 |
28.0 |
70.0 |
56.0 |
10.5 |
6.0 |
G 1/8" |
G 1/8" |
0.165 |
|
GT-6 |
40.0 |
28.0 |
70.0 |
56.0 |
10.5 |
6.0 |
G 1/8" |
G 1/8" |
0.140 |
|
GT-8 |
50.0 |
33.0 |
86.0 |
68.0 |
12.0 |
7.0 |
G 1/8" |
G 1/8" |
0.250 |
|
GT-10 |
50.0 |
33.0 |
86.0 |
68.0 |
12.0 |
7.0 |
G 1/8" |
G 1/8" |
0.255 |
|
GT-10-S |
50.0 |
33.0 |
86.0 |
68.0 |
12.0 |
7.0 |
G 1/8" |
G 1/8" |
0.263 |
|
GT-13 |
65.0 |
42.0 |
113.0 |
90.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
0.565 |
|
GT-16 |
65.0 |
42.0 |
113.0 |
90.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
0.580 |
|
GT-16-S |
65.0 |
42.0 |
113.0 |
90.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
0.614 |
|
GT-20 |
80.0 |
56.0 |
128.0 |
104.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
1.090 |
|
GT-25 |
80.0 |
56.0 |
128.0 |
104.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
1.120 |
|
GT-25-S |
80.0 |
56.0 |
128.0 |
104.0 |
16.0 |
9.0 |
G ¼" |
G ¼" |
1.200 |
|
GT-30 |
100.0 |
73.0 |
160.0 |
130.0 |
20.0 |
11.0 |
G 3/8" |
G 3/8" |
2.200 |
|
GT-36 |
100.0 |
73.0 |
160.0 |
130.0 |
20.0 |
11.0 |
G 3/8" |
G 3/8" |
2.300 |
|
GT-36-S |
100.0 |
73.0 |
160.0 |
130.0 |
20.0 |
11.0 |
G 3/8" |
G 3/8" |
2.530 |
|
GT-40 |
120.0 |
83.0 |
194.0 |
152.0 |
24.0 |
17.0 |
G 3/8" |
G 3/8" |
3.690 |
|
GT-48 |
120.0 |
83.0 |
194.0 |
152.0 |
24.0 |
17.0 |
G 3/8" |
G 3/8" |
3.890 |
|
GT-48-S |
120.0 |
83.0 |
194.0 |
152.0 |
24.0 |
17.0 |
G 3/8" |
G 3/8" |
4.290 |
Technical characteristics
|
|
Frequency |
Force |
Air consumption |
Noise |
|
Type |
rpm |
N |
l / min |
level |
|
|
2 bar |
4 bar |
6 bar |
2 bar |
4 bar |
6 bar |
2 bar |
4 bar |
6 bar |
dBA |
|
GT-4 |
14000 |
15000 |
15000 |
135 |
180 |
200 |
33 |
58 |
83 |
60-70 |
|
GT-6 |
11500 |
12000 |
12500 |
130 |
175 |
210 |
33 |
58 |
83 |
60-70 |
|
GT-8 |
36000 |
42000 |
46000 |
990 |
2060 |
2910 |
46 |
80 |
112 |
60-70 |
|
GT-10 |
27500 |
35000 |
37500 |
840 |
1390 |
2400 |
46 |
80 |
112 |
60-70 |
|
GT-10-S |
17000 |
23000 |
25000 |
650 |
1350 |
1950 |
46 |
80 |
112 |
60-70 |
|
GT-13 |
26000 |
30000 |
33000 |
1400 |
2440 |
3730 |
120 |
200 |
290 |
60-70 |
|
GT-16 |
17000 |
21500 |
24000 |
1220 |
2090 |
3160 |
120 |
200 |
290 |
60-70 |
|
GT-16-S |
11500 |
15500 |
17000 |
1100 |
1900 |
2700 |
120 |
200 |
290 |
60-70 |
|
GT-20 |
17000 |
20000 |
23000 |
2170 |
4040 |
5520 |
185 |
325 |
455 |
60-70 |
|
GT-25 |
12000 |
15500 |
17000 |
2120 |
3510 |
5070 |
185 |
325 |
455 |
60-70 |
|
GT-25-S |
8500 |
11000 |
13000 |
2250 |
3600 |
4900 |
185 |
325 |
455 |
60-70 |
|
GT-30 |
13000 |
14000 |
16000 |
3380 |
5430 |
7540 |
330 |
530 |
745 |
60-70 |
|
GT-36 |
8000 |
10000 |
13000 |
3290 |
5360 |
7190 |
330 |
530 |
745 |
60-70 |
|
GT-36-S |
6100 |
7200 |
8300 |
4100 |
6200 |
7500 |
330 |
530 |
745 |
60-70 |
|
GT-40 |
7700 |
8800 |
9500 |
4300 |
7300 |
9800 |
425 |
700 |
970 |
60-70 |
|
GT-48 |
6000 |
7500 |
9700 |
4900 |
7700 |
10500 |
425 |
700 |
970 |
60-70 |
|
GT-48-S |
0 |
5600 |
6300 |
0 |
7500 |
12000 |
425 |
700 |
970 |
60-70 |
Data obtained with a Kistler 3-axis dynamometer on a heavy laboratory test block and displayed by Kistler control monitor (COMO). Frequency and force will decrease on a less rigid mount. Specifications subject to change without notice or obligation.
Description
A high speed range and eccentric working moment are combined in these vibrators to produce a powerful vibration.
The body is made from an extrude stove enamelled aluminium section and the hard coated end plates enables the vibrators to be used in the food and pharmaceutical industries.
The GT-Turbine Vibrators conform to current international noise regulations under factory test conditions.
|
|
